6
Attaching Purchased Piping
Attach pre-packaged piping to make a bold finish on home decorating
projects, crafts or garments.
Machine Set-up:
Stitch: Straight Stitch
Pattern Selector: A
Stitch Width: 1, no width
Stitch Length: 3-4
Presser Foot: Zipper Foot
Needle Position: Center
Materials:
(2) 3” x 6” pieces of home décor fabric
7” pre-packaged piping
Procedure:
Place fabric right sides together.
Place piping between the fabrics, matching the piping’s raw edge with
the fabric’s raw edges.
On the wrong side of the fabric, sew a straight stitch close to the piping.
Note: The Zipper Foot can be attached right or left, allowing for
the piping to be inserted from either side.
Stitching Line
Piping Raw Edges
Raw Edge of Fabric
To Next Page
Loading...
