EasyManua.ls Logo

Singer CG-550 - Sewing with a Wing Needle

Singer CG-550
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Sewing with a Wing Needle
Use a Wing Needle to create a beautiful heirloom look on pillowcases, napkins,
or special occasion garments. A Wing Needle is very wide and makes a large
opening or hole in the fabric every time it stitches. Several different types of
stitches can be used. For best results, use a stitch with forward-back
movement, so that the needle penetrates the same hole more than once.
Machine Set-Up:
Stitch: Zigzag Stitch
Pattern Selector: A
Stitch Width: 1-2
Stitch Length: 3-5
Presser Foot: Special Purpose Foot (J)
Needle: Wing Needle*
Needle Position: Center
Materials:
Linen or other natural fiber fabric, spray-starched for added firmness
60-80 weight sewing thread
60-80 weight sewing thread in bobbin
Procedure:
Pull one or two threads to establish a guideline for stitching.
Stitch along the pulled threads. Notice the pronounced holes that are
created by the stitching.
Note: An alternative method is to trace a design onto fabric using
chalk, water-soluble or air soluble marker. (Use stencils, templates or
create a design.) Stitch along the drawn lines of the design.
* Wing Needle is an optional accessory. Check with your SINGER® Retailer.

Other manuals for Singer CG-550

Related product manuals