Singer CG-550 - Page 22

16
Turn Pattern Selection knob to Step One of the Four-Step buttonhole.
Sew, and the machine will stitch the right side of the buttonhole.
Stop sewing when the needle reaches the fabric mark which indicates
the bottom of the buttonhole.
Turn Pattern Selection knob to Step Two of the Four-Step buttonhole.
Sew 5 to 6 stitches, bartacking the bottom of the buttonhole.
Turn Pattern Selection knob to Step Three of the Four-Step buttonhole.
Sew, and the machine will stitch in reverse, making the left side of the
buttonhole.
Stop sewing when the needle reaches the fabric mark which indicates
the top of the buttonhole.
Turn Pattern Selection knob to Step Four of the Four-Step buttonhole.
Sew 5 to 6 stitches, bartacking the top of the buttonhole.
Cut open buttonhole and use a liquid fray preventer to reinforce the
buttonhole.