BS Series Multitest Analyzer
4. Specific Proteins Test Function and Operation
4.1 Principle
Specific proteins test is based on the light scattering principle. When immune complex which
consists of specific proteins meet incident ray in detection System, the intensity of scattered
light at 90 degrees is directly proportional to amount and size of immune complex within certain
limits.
4.2 Operation
Attention:
Choose scattered light when testing specific proteins, put macro cuvettes or micro cuvettes
with adaptors into test pots to proceed. However, the flowing cuvette is not available for
this test. In addition, there should be light-shield upon cuvettes to ensure stability of
detection signal.
Go to the main menu, choose “Specific protein”
The Device starts specific protein testing mode. Selected and set different function keys
according to need. Keys reference is made to “Biochemical” and “Coagulation” menu.
5. Device Maintenance
5.1 Daily Maintenance
Daily maintenance is mainly on washing the flowing cuvette, keep it clean. Before testing,
10 times washing are necessary. After each test, wash 4-5 times is essential. If there are
bubbles in flowing cuvette, you may draw ethanol to soak and flush firstly, then wash it by
To Next Page
Loading...