© Jul 2020 3-6 GTJZ0612&0812&1012&1212 Operation Manual
SAFETY
UNSAFE OPERATION HAZARDS
• Do not push any object outside
the platform. The maximum lateral
force allowed is:
GTJZ0612: 400 N(90 lbf)indoor/
outdoor
GTJZ0812: 400 N(90 lbf)indoor/
outdoor
GTJZ1012: 400 N(90 lbf)indoor/
200 N(45 lbf)outdoor
GTJZ1212: 400 N(90 lbf)indoor/
200 N(45 lbf)outdoor
• Do not change any machine parts
that may affect safety and
stability.
• Do not replace key parts that
affect machine stability with
different weights or
specifications.
• Do not change or modify moving
aerial platforms without the
manufacturer’s written
permission.
• On the platform, do not attach an
additional device for placing tools
or other materials to the guardrail.
This will increase the platform
weight, surface area and load.
• Do not put ladders or scaffolding
on the platform or any part of this
machine.
• Do not use the machine on any
mobile or movable surface or
vehicle. Ensure all tires are in
good condition, the slotted nuts
tightened and the cotter pins
complete.
• Do not use a battery that weighs
less than the original lead acid
battery(30kg [66 lb]) or lithium
battery (120kg [265 lb]).Do not use
a battery that weighs less than the
original lead acid battery (40 kg
[88 lb]) or lithium battery (160 kg
[353 lb]) about GTJZ1212. The
battery not only provides power, it
also serves as a counterweight.
The battery is vital to maintaining
the stability of the machine.
UNSAFE OPERATION HAZARDS
• Do not place or attach any
suspended load onto any part of
the machine.
• Do not use the machine as a
crane.
• Do not use the platform to push
the machine or other objects.
• Do not allow the platform to touch
nearby objects.
• Do not tie the platform onto
nearby objects.
• Do not put the load outside the
platform.
• When the platform is caught or
stuck or when other objects in the
vicinity impede its normal
movement, do not use the
platform controller to lower the
platform. If you intend to lower the
platform with a ground controller,
you must operate it only after all
personnel have left the platform.
• Do not operate the machine when
the chassis door box is open.
• When one or more of the
machine’s tires are off the ground,
evacuate all personnel before
attempting to stabilize the
equipment. Use a crane, forklift or
other suitable apparatus to
stabilize the equipment.
FALL HAZARDS
At a minimum, operators must operate and maintain the
machine as stated in this manual and in the Mainte-
nance Manual in addition to following more stringent in-
dustry regulations and workplace rules.
To Next Page
Loading...
