PRE-OPERATION INSPECTION
GTJZ0612&0812&1012&1212 Operation Manual 5-3 © Jul 2020
NOTICE
After the battery is fully charged, wear protective
gloves for inspection.
• Check the acidic liquid level of the lead-acid battery.
If needed, refill the distilled water through a filling
line above the lead-acid battery. Only add enough
distilled water to cover the plate. Never overfill the
tube at the end of the charging cycle.
• Ensure the connection of the battery cable is not
corroded.
• Ensure the battery is firmly in place and the cable
wiring is fastened.
BODILY INJURY HAZARD
Lead-acid batteries and lead-acid
maintenance-free batteries contain
acid. Avoid acid overflow or contact
with acid in lead-acid batteries and
lead-acid maintenance-free batteries.
If battery acid spills, use water mixed
with bicarbonate (baking soda) to
neutralize the acid.
NOTE: Add wiring end protectors and antiseptic seal-
ants to help eliminate corrosion of the battery terminals
and cables.
To Next Page
Loading...
