Need help?Do you have a question about the SIPOS AKTORIK 2SA5.6 and is the answer not in the manual?
General| Brand | SIPOS AKTORIK |
|---|---|
| Model | 2SA5.6 |
| Category | Controller |
| Language | English |
Instructions for mounting the actuator to a valve or gear, including general guidelines and specific types.
Guidelines and safety precautions for connecting the actuator's electrical components, including mains and signal cables.
Operation and functions of the actuator's local control panel, including push buttons, LEDs, and display.
General prerequisites, safety precautions, and checks before commencing actuator commissioning procedures.
Steps to access the commissioning menu, including the required code for authorization and parameter changes.
Configuration of essential actuator parameters like closing direction, speeds, and torque cut-off settings.
Procedure for adjusting the actuator's end positions when equipped with a signaling gear.
Procedure for adjusting end positions for actuators using a non-intrusive position encoder.
Table detailing parameters specific to valve operation, including their default values and possible settings.
List of common fault messages, their explanations, and possible remedies for troubleshooting actuator issues.
To Next Page
