Need help?Do you have a question about the SIPOS AKTORIK SIPOS 5 and is the answer not in the manual?
General| Power Supply | 24 V DC |
|---|---|
| Protection Class | IP67 |
| Communication | PROFIBUS DP, Modbus RTU |
| Feedback Signals | Position, torque, alarm signals |
| Mounting | Flange mounting |
| Ambient Temperature | -20°C to +70°C (standard), -40°C to +80°C (optional) |
General safety instructions and warnings for the operation of actuators.
Instructions for mounting the actuator to the valve or gear unit, including general steps and shaft types.
Detailed instructions for making electrical connections to the actuator, including safety precautions and various connection types.
Operation via local control station, including LEDs, buttons, display indications, and signal representation.
Navigating menus, changing parameters, and understanding actuator state indications.
Controlling and observing the actuator remotely via conventional or fieldbus connections.
Steps to access the commissioning menu, including entering the required access code.
Setting closing direction, speeds, cut-off modes, and tripping torques for actuator operation.
Adjusting signaling gear ratio and end positions for proper actuator operation.
Adjusting end positions and readjusting them for non-intrusive actuator versions.
Detailed list of messages, their explanations, and possible remedies for actuator faults and status.
To Next Page
