Y070.020/GB Page 5
Operation instructions
SIPOS 5 PROFITRON, HiMod
1
General information
1 General information
1.4.2 Scope
For the sake of clarity, not all details of all versions of the product are described in these operation
instructions, nor can they cover all conceivable cases regarding installation, operation and mainte-
nance. For this reason, the operation instructions only contain instructions for qualifi ed personnel
(refer to section 1.1) that are necessary when the equipment is used for the purpose for which it is
intended or in industrial applications.
If the devices are used in non-industrial applications with increased safety requirements, they have
to be ensured by additional safety measures during assembly.
In case of any questions, and especially where detailed product information is not available, contact
the SIPOS Aktorik sales representative in charge. Always state the type designation and the works
number of the respective actuator (see rating plate).
It is recommended that the services and support of the responsible SIPOS Aktorik service centers
are utilized for all planning, installation, commissioning and service task.
The contents of these operation instructions and product documentation shall not become part of or
modify any prior or existing agreement, commitment or legal relationship. The Purchase Agreement
contains the complete and exclusive regulation on material defect liability of SIPOS Aktorik. These
contractual regulations are neither amended nor limited by the descriptions contained in these ope-
ration instructions and documentation.
1.5 Supplementary operation instructions
2SB5 linear actuator Y070.027
2SC5 part-turn actuator Y070.028
2SG5 small part-turn actuator Y070.029
COM-SIPOS computer parameterization software Y070.024
PROFIBUS operation instructions Y070.023
MODBUS operation instructions Y070.022
HART instructions Y070.221
Enclosure protection IP68 „K51“ Y070.047
Increased vibration resistance „K57“, „K58“ Y070.048
Increased vibration resistance according to seismic class S2A „K59“ Y070.049
Very high corrosion protection
corrosivity category C5 with long protection time „L38“
Y070.162
SIPOS 5 actuator with USP Y070.053
Binary and analog inputs freely available via bus Y070.050
Optional software functions See chapter 6.3
Short instructions PROFITRON Y070.021
and others
Any special installation and operation instructions furnished by the suppliers of subcontracted com-
ponents, attachments or fi xtures are attached to the set of instructions and have to be observed.
To Next Page
Loading...
Need help?
General
