SIPOS AKTORIK SIPOS 5 User Manual

Y070.020/GB Page 79
EU Declaration of Conformity / Declaration of Incorporation in
compliance with Machinery Directive
for electric actuators of the following type designations:
2SA5…, 2SB5…, 2SC5…, 2SG5…
2SA7..., 2SG7…
in versions:
ECOTRON
PROFITRON
HiMod
SIPOS Aktorik GmbH as manufacturer declare herewith, that the above mentioned actuators meet the basic
requirements of the following Directives:
2014/30/EU (EMC Directive)
2006/42/EC (Machinery Directive)
The following harmonised standards in terms of the specifi ed directives have been applied:
Directive 2014/30/EU
EN 61800-3: 2004 /A1: 2012
Directive 2006/42/EC
EN ISO 12100:2010
EN ISO 5210:1996
EN ISO 5211:2001
DIN 3358:1982
SIPOS actuators are designed for the operation of industrial valves. Putting into service is prohibited until the
fi nal machinery has been declared in conformity with the provisions of Directive 2006/42/EC.
The following basic requirements in compliance with Annex I of the Directive are respected:
Appendix I, articles 1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.6, 1.3.1, 1.3.7, 1.5.1, 1.6.3, 1.7.1,
1.7.3, 1.7.4
The manufacturer shall be obligated to electronically submit the documents for the partly completed machine-
ry to national authorities on request. The relevant technical documentation pertaining to the machinery descri-
bed in Annex VII, part B has been prepared.
Authorised person for documentation: Dr. Thomas Suckut, Im Erlet 2, 90518 Altdorf, Germany
Furthermore, the essential health and safety requirements in compliance with Directive 2014/35/EU (Low
Voltage Directive) are fulfi lled by applying the following harmonised standards, as far as applicable for the
products:
EN 60204-1:2006 / A1:2009 / AC:2010
EN 60034-1:2010 / AC:2010
EN 50178:1997
Altdorf, 01.04.2016
Dr. Thomas Suckut
Managing Director
This declaration does not contain any guarantees. The safety instructions in product documentation supplied with the devices
must be observed. Non-concerted modifi cation of the devices voids this declaration.
A
ltd
or
f
,
01
.
04
.
20
0
0
16
1
1
Dr
D
D
. Th
om
m
m
m
as
S
S
S
ucku
t
Mana
g
in
g
Directo
r
Certifi cates are valid as from the indicated date of issue. Subject to changes without notice. The
latest versions are available for download at http://www.sipos.de..

SIPOS AKTORIK SIPOS 5 Specifications

General

Power Supply	24 V DC
Protection Class	IP67
Communication	PROFIBUS DP, Modbus RTU
Feedback Signals	Position, torque, alarm signals
Mounting	Flange mounting
Ambient Temperature	-20°C to +70°C (standard), -40°C to +80°C (optional)