Y070.020/GB Page 21
Operation instructions
SIPOS 5 PROFITRON, HiMod
4
Instructions on operator control and operation
4 Instructions on operator control and operation
4.5 COM-SIPOS
The COM-SIPOS parameterization program is a software tool for
■
operation: operation of the actuator in local operation;
■
observing: reading the actuator parameters, the device state in the „Local“ and „Remote“ state;
■
diagnosis: trouble shooting;
■
parameterization: reading and changing the actuator parameters;
■
loading new fi rmware: software update to the state-of-the-art;
■
archiving: saving of the parameters and torque reference curves of the actuator.
The connection between computer and actuator is established via a standard null modem cable or
optionally via Bluetooth.
COM-SIPOS is available including null modem cable, USB serial adapter and user manual (on CD),
ordering number: 2SX5100-3PC02. A Bluetooth interface is available as an option.
To Next Page
Loading...