9
GB
9
Parts and controls
Hopper lid GRIND LEVEL dial
Move the stopper to (release) in order to attach /
detach.
Release Fix
Stopper
Attach firmly and deeply until it clicks into place.
Mill upper side
How to detach
Turn the handle on the upper side of the mill.
Counterclockwise until it stops and then lift it up.
How to attach
①
Attach the upper of the mill into the inside of the
mill, then rotate it gently to align it with the
position where it fits all the way to the back.
②
Turn the handle clockwise until it stops
Pull the handle gently to make sure the upper side
of the mill does not pull out.
How to detach
Lift up and detach.
How to attach
Align the side protrusions with the grooves and slide
them in.
Inside the hopper
This product is tested using coffee beans to confirm
performance, and all products are cleaned before shipping.
Coffee grounds may adhere to the inside of the hopper and
the fragrance of coffee may remain, but this does not affect
health.
X
Cleaning brush
Can be kept inside the hopper lid
To Next Page
Loading...