Siruba C007K User Manual

- 13 -
(4).Key functions in the Parameter【Mode A and B】：(Example as the following)
(5).How to access the【Mode Value】 and adjust the setting
Step 1：Confirm the parameter code you want to make adjust.
(See the parameter table for the detail)
Step 2：Follow the instruction to access parameter area and call out the parameter code make range.
Speed, timing and angle setting can be set as the following：
Step 3：Start making adjust parameter value. (Function selection use key and to【001. H】
value setting for your reference)
A). How to increase the default value：
Example Factory default setting【H.4500】increase to【H.5000】. (See chapter 5, section (4) or (5)
to learn how to access a、b、c value setting, then do the following step by step.)
PS
STOP
STOP
d. Into 【H.4500】value area
e. Press just 1000
th
and 100
th
di
g
it
f. After it shown at 5000
PS
STOP
PS
STOP
PS
STOP
g. Into 【H.4500】value area
h. Press just 1000
th
and 100
th
di
g
it
PS
STOP
PS
STOP
In 【Mode A】 First parameter showing is 【001. H】 All available parameter start 1~46.
In 【Mode B】 First parameter showing is 【047.MAC】 All available parameter start 1~122.
7-segment
display
.
Parameter
increment key
Same as parameter
increment key
Parameter
decrement key
Enter Value area
No function
7-segment
display
No function
.
.
.
(Note: Use key to adjust
value to 5, and key to 0)
.

Siruba C007K Specifications

General

Brand	Siruba
Model	C007K
Category	Sewing Machine
Language	English