Siruba VC008A User Manual

1
1. Safety Precaution:
When operating and installing TD Servo Motor series control box, please observe the following
precautions. This driving product is only suitable for a specific range of sewing machines and must not
be used for other purposes.
1.1 Safety of working environment:
(1).
Power voltage:
The power voltage applied should be within the range of ±10 % of the specification on the name
plate of the control box.
(2). Interference of electromagnetic waves:
Keep away from the high frequency magnetic wave devices/ transmitters to avoid the resulting
electromagnetic waves from affecting this driving equipment, leading to abnormal operation.
(3). Temperature:
a.
Please don’t operate in places with room temperature above 45°C or below 5°
C.
b. Please do
n’t operate in places under direct sun light or outdoors.
c.
Please don’t operate near the heater
.
d. Please do
n’t operate in places with relative humidity below 30 % or above 95% or places with
dew.
(4). Ambience:
a. Please do
n’t operate in dusty places, places with corrosive materi
als.
b.
Please don’t operate in places with volatile
gases.
1.2 Safety Precaution of Installation:
(1). Motor and control box: please follow the instruction in this manual for proper installation.
(2). Accessories: When installing other optional parts or accessories, please turn off the power switch
and remove the plug from outlet.
(3). Power cable:
a.
Avoid external objects on power cord or excessive distortion of power cord.
b. When plugging the cord into the outlet, ensure that the power voltage applied should be within
the range of ±10 % of the specification on the name plates of the cont
rol box.
※ Attention : If the power specification of the control box is AC 220V, please
don’t connect to AC 380V power outlet. Otherwise, error code
will appear. In this case, please turn off the power
switch immediately and check the power voltage. Continuous
supply of 380V over 5 minutes might damage the PCB,
endangering the safety of users.
Before operation, please read this technical document and related manual of
the machine head carefully and operate properly. Furthermore, installation and
o
p
eration should be done b
y
trained
p
ersonnel.
Interference
Keep away

Siruba VC008A Specifications

General

Brand	Siruba
Model	VC008A
Category	Sewing Machine
Language	English