• Keep hands, hair and clothing away from contact with rollers.
• Do not contact the blade of the dies.
Before sliding product into the rollers, observe the
caution and warning labels printed on your
Vagabond 2 Machine.
Sandwich/Platform Alignment
Before sending product through the Vagabond 2 Machine, it is important
to ensure that the Platform, Cutting Pads and die, or the “sandwich,” is
aligned properly.
To align the “sandwich,” press the Guide Flaps inward until they both
make contact with the “sandwich” with enough force to move them into
alignment before entering the rollers. Once the “sandwich” is aligned, you
may proceed to slide it into the roller opening and depress the motor on/o
button. Aligning the “sandwich” will prevent binding as it passes through
the rollers.
To Next Page
Loading...
