EasyManua.ls Logo

SKC 210-1002MTX - Care of the Battery Pack

SKC 210-1002MTX
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 28 210-PMTXM Issue L www.skcltd.com
Care of the Battery Pack
Battery Charging
Charge battery pack fully before first use to ensure optimum performance.
Full battery capacity will be achieved after 2 to 3 full charge / full discharge cycles.
Use only SKC approved charger designated for this battery pack. Use of a non-SKC approved charger
may impair battery performance or even cause irreparable damage, and will invalidate the battery pack
warranty.
Battery Performance
Charging temperature - For optimum performance charge NiMH batteries between 0 and +40°C.
Do not overcharge - For optimum performance disconnect battery pack from charger after 24 hours.
Discharge temperature - For optimum performance discharge NiMH batteries between -10 and +45°C
(refer also to pump specifications on page 3 for other limitations on operating temperature for intrinsically
safe applications).
Battery Maintenance
Battery cycling during regular use - Available battery capacity may be reduced when battery is only partially
discharged during each use. To maintain optimum capacity during regular battery use, cycle battery once
a month. To cycle battery, run pump until low battery shutdown occurs, then fully charge battery.
Long term storage and highly infrequent use -
1. Charge battery fully prior to long term storage.
2. Disconnect battery from pump and store in a cool, dry place at temperature between 0 and 30°C.
3. Recharge battery at least once a year (or more frequently if stored at temperature above 30°C).
4. Cycle battery 2 to 3 times after long term storage to restore optimum capacity.

Related product manuals