5SKF 729124
1. Description
The 729124 has a maximum pressure of 100 MPa (14 500 psi) and delivers a volume
per stroke of 0,5 cm
3
(0.03 in
3
). The pump is suitable for SKF hydraulic nuts (≤ HMV 54),
and for mounting or dismounting bearings or components with an interference fit applying
the SKF Oil Injection Method, where a maximum pressure of 100 MPa is required.
The pump is supplied with a 1,5 metre long, high pressure hose with quick connection
coupling. Mating quick connection nipple for attachment to the workpiece is included. The
pump is filled with SKF mounting fluid LHMF 300 and comes with an additional 1 litre can
with the same fluid. Everything is packed in a sturdy plastic case. The pump has an over-
pressure valve and a pressure gauge. The release valve is an integrated part of the pump
head.
2. Technical data
Designation 729124
Maximum pressure 100 MPa (14 500 psi)
Volume per stroke 0,5 cm
3
(0.03 in
3
)
Oil container capacity 250 cm
3
(15 in
3
)
Handle force at 100 MPa 300 N (66 lbf)
Pressure hose 1,5 m (5 ft) long with quick connection coupling
Connection nipple G
1
/4 external or internal thread
Oil viscosity of mounting fluid 300 mm
2
/s (1 400 SUS) at 20 °C
Weight (filled with oil) 3,5 kg (8 lb)
English
To Next Page
Loading...
