To Next PageTo Next Page
Need help?Do you have a question about the SKF CMDT 391 and is the answer not in the manual?
General| Brand | SKF |
|---|---|
| Model | CMDT 391 |
| Category | Accessories |
| Language | English |
Provides essential safety warnings and precautions for handling and operating the sensor.
Outlines safety measures for personal protection, including dress code and use of safety equipment.
Details on how to handle the sensor safely, including checks after dropping and proper servicing.
Explains the sensor's IP rating and limitations regarding exposure to water spray and extreme conditions.
Guidelines to prevent physical damage to the sensor and ensure user safety during operation and storage.
Specifies conditions, including agency approvals, for using the Ex-approved version of the sensor.
Describes the manual's content, covering setup and use of the sensor and companion apps.
Provides contact information and resources for obtaining technical assistance and support.
Introduces the SKF Enlight QuickCollect system and its role in walk-around data collection.
Outlines the general steps involved in using the QuickCollect sensor for machinery monitoring.
Details the function of the power button and the meaning of different LED indicators on the sensor.
Explains how the sensor collects vibration and temperature data from machinery.
Describes the temperature measurement capability, sensor location, and limitations.
Instructions on connecting and using an external accelerometer with the CMDT 391 sensor.
Provides recommendations for sensor calibration frequency, repair services, and environmentally responsible disposal.
Steps for charging the sensor's battery and preparing it for initial operation.
Best practices for performing accurate vibration and temperature measurements on machinery.
Guide to obtaining and starting the SKF QuickCollect mobile application on iOS and Android devices.
Instructions on configuring alarm thresholds and identifying machines within the QuickCollect app.
Step-by-step process for connecting the sensor to the app and performing measurements.
Instructions on how to update the sensor's firmware wirelessly via the application.
How to access and interpret graphical plots of the collected velocity and acceleration data.
Steps to generate and send email reports containing the recorded measurement data.
