SKF CMDT 391 - Using the QuickCollect or ProCollect Apps; Downloading, Installing and Launching the QuickCollect App

QuickCollect CMDT 391 / CMDT 391-Ex 4 - 1
User Manual – Revision B
4
Using the QuickCollect or ProCollect Apps
ProCollect App
The QuickCollect sensor can be used with the SKF QuickCollect, DataCollect or ProCollect
apps. The operation of the QuickCollect app is described below, for details and guidance
regarding the use of the ProCollect app, refer to the SKF ProCollect User Manual (15V-
090-00089-100).
Downloading, Installing and Launching the QuickCollect App
The QuickCollect app is compatible with iOS 9.0 or later and can be downloaded from
the Apple App Store or Google Play.
To launch QuickCollect for the first time:
• Tap the SKF QuickCollect icon on the device. The welcome screen will appear.
Figure 4 – 1.
QuickCollect app welcome screen.
• Tap Configure thresholds to jump directly to the Settings table and configure the
measurement danger and alert alarm thresholds or tap Skip to aigate to the apps
home screen.
Tap to select Stop reminding me to skip this welcome screen when launching the
app in the future.