42
7 FLOW TUBE -SPECIFIC ALARM BSS
7.1 EC Declaration of conformity
EU Declaration of Conformity in accordance with Directives 2014/30/EU, Annex IV
The manufacturer declares under its sole responsibility that the product described below conforms to all the European Union’s applicable
harmonised legislation at the time of placing on the market.
The Safeflow monitor is a flow meter unit for adjusting, measuring and controlling the lubricant flow in the circulat-
ing lubrication system.
SF05A/10A/15A/20A/30A-XX-XX-BSC/BSS
The following directives and standards were applied in the applicable areas:
2011/65/EU: ROHS II, including the addition (EU) 2015/863
2014/30/EU: Electromagnetic compatibility:
EN 61000-6-4:1997 EN 61000-6-2:1999 EN IEC 63000:2018
Muurame, 21 September 2021
Design Office Manager
SKF Lubrication Management
Product Specialist
Electronic
Manufacturer: Oy SKF Ab Finland Teollisuustie 6 40951 Muurame FINLAND
UK Declaration of Conformity in accordance with Electromagnetic Compatibility Regulations
2016 No. 1091
The manufacturer declares under its sole responsibility that the product described below conforms to all the United Kingdom’s applicable
harmonised legislation at the time of placing on the market.
Technical documentation has been drawn up in accordance with Part B of Annex VII. The manufacturer undertakes to deliver the tech-
nical documentation to national authorities in electronic format when so requested. The company authorised to compile the technical doc-
uments is SKF (U.K.) Limited, 2 Canada Close, Banbury, Oxfordshire, OX16 2RT, GBR.
The Safeflow monitor is a flow meter unit for adjusting, measuring and controlling the lubricant flow in the circulat-
ing lubrication system.
SF05A/10A/15A/20A/30A-XX-XX-BSC/BSS
The following regulations and standards were applied in the applicable areas:
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 No. 3032
• Electromagnetic Compatibility Regulations 2016 No. 1091:
EN 61000-6-4:1997 EN 61000-6-2:1999 EN IEC 63000:2018
Muurame, 15 June 2021
Design Office Manager
SKF Lubrication Management
Product Specialist
Electronic
Manufacturer: Oy SKF Ab Finland Teollisuustie 6 40951 Muurame FINLAND