10
SKF TIH 100m
5. Operation
5.1 Function of displays
• The remote control display shows the selected
time or temperature for heating.
• The power LED’s show the selected
power setting.
Display Indication
t time in minutes
°C temperature in degrees Celcius
°F temperature in degrees Fahrenheit
S
S
50%
100%
P
TIH RC
5.2 Function of buttons
Button Function
POWER Press to adjust the power. The selected power is indicated with an LED
MODE Press to switch between TIME MODE and TEMP MODE
UP (+) Press to increase the value shown on the remote control display
DOWN(-) Press to decrease the value shown on the remote control display
START / STOP Press to start or stop the heater. The LED on the START/ STOP
button is lit when the heater is heating and flashes during
temperature measurement
To Next Page
Loading...
Need help?
General
