Skil 3386 - Operation; ON;OFF Switch and Safety Key

16.
ON/OFF switch (Fig. 21)
1. To turn the saw ON, move the switch (1) to the up
(ON) position.
2. To turn the saw OFF, move the switch to the down
(OFF) position.
3. To lock the switch in the OFF position:
a. Wait until the band saw has come to a complete stop.
b. Remove the safety key (2) from the switch housing.
Store the safety key in a safe place.
4. To unlock the switch and turn the saw ON, insert the
safety key into the switch, and move the switch to the
ON position.
LED work lamp (Fig. 22)
The LED work lamp (3) has an adjustable gooseneck
for precision control when aiming the light.
FIG. 21
2
1
FIG. 22
3
Operation