7.
Unpacking and Checking Contents
To reduce the risk of injury, never
connect plug to power source outlet
until all assembly steps are complete and until you
have read and understood the entire owner’s
manual.
Model 3386 Motorized Band Saw is shipped complete
in one box.
1.Unpacking and Checking Contents, separate all parts
from packing materials. Check each one with the
“Table of Loose Parts” to make sure all items are
accounted for before discarding any packing material.
If any parts are missing, do not at -
tempt to assemble the band saw, plug
in power cord or turn the switch on until the
missing parts are obtained and are installed
correctly.
2.Remove the protective oil that is applied to table. Use
any ordinary household type grease and spot
remover.
To avoid fire or toxic reaction, never
use gasoline, naptha or similar highly
volatile solvents.
3.Apply a coat of paste wax to the table to prevent rust.
Wipe all parts thoroughly with a clean dry cloth.
Table of Loose Parts
ITEM DESCRIPTION QTY.
A Band Saw 1
B Table 1
C Fence 1
D Miter gauge assembly 1
E 3 mm allen wrench 1
F Table bolt, washer, lock washer 4
G Operating Guide 1
Tools Needed
An adjustable wrench, combination square, and a
phillips screwdriver will be needed for assembly and
adjustments.
A
B
F
C
D
E
WARNING
!
WARNING
!
WARNING
!
G
To Next Page
Loading...
