Skipala DIGR-1202/E User Manual

19/22
8.27. A40 Language
Language selection.
English – Always available.
Czech – Is delivered if another language version has
not been ordered. As standard Russian or German
can be ordered or another language agreed on.
8.28. A41 Information
For more information about this product, visit our
Internet pages http://www.skipala.cz
8.29. Factory settings
If there are complications with controller, RESTART it
to reset the factory settings of all parameters. RESTART
as follows:
 Disconnect the controller from the supply network
and wait at least 10 seconds to discharge
condensers.
 press the
enter
button and hold it down
 connect the controller to the supply network
 release the
enter
button
The parameter values of the factory settings are given
in the table (Fig. 10).

Skipala DIGR-1202/E Specifications

General

Brand	Skipala
Model	DIGR-1202/E
Category	Controller
Language	English