33
4.7 Speed log history screen (screen 6)
EMES60 is recording speed and all important navigational data during 30 days.
Each day is recorded into the separate file. After 30 days of recording the oldest file
will be overwritten. To change the day that is shown, touch the top-left button.
All information can be replayed directly on the HMI unit, and also all history files can
be downloaded to the external flash disk, see section 7.1
The history screen window provides a graph of speed data against time.
Touch at a point in the graph to show the data at that time; a vertical line appears
at the selected time, and the time box in the second row down shows the selected
time. The longitudinal and transversal speed, important system settings and
navigational data related to the selected point of time is displayed in the lower part
of the screen.
Use the arrows at the bottom of the screen navigate in the record. The single arrows
below the display area move the cursor left and right, and the double arrows move
the entire screen left and right when it is zoomed
The speed scale can be changed by touching in the area of the range scale lines.
Touching in the lower area changes the lower scale range. Touching in the upper
area changes the upper scale range.
To Next Page
Loading...