35
4.8 Speedlog oscilloscope screen (screen 7)
Note that this screen is only available with Administration privileges, ref 3.6
This screen is used for speedlog sensor troubleshooting and processing setup.
The processing setup is accessible in the Service mode only.
Three frames indicate the digitized receiver-signal either in frequency domain or vs
time, which greatly facilitates troubleshooting.
GPS information is indicated in the upper line.
4.9 Speedlog test and troubleshooting screen (screen 8)
Note that this screen is only available with Administration privileges, ref 3.6
Alert indicator Screen Dump, Time and
water temperature
Vertical scale in AD counts: touch to change
Transceiver setup (service function), Stop
update, toggle frequency/time domain
Digitized longitudinal signal, in frequency or time domain
Digitized transversal signal, in frequency or time domain
Digitized transmitter signal, in frequency or time domain
To Next Page
Loading...