Navigation 29
Entering your position
– Press in the Navigation main menu ⇒ page 16, fig. 13
to enter the vehicle position.
– Press . The entry window for the town
appears. The entry for the street is made after you make your
entry and confirm it with . After confirming the name of the
street you will see a list of the streets which have an intersec-
tion with the named street.
– Select the intersection and confirm your choice by pressing
the menu knob.
– Now enter your position either before or after this intersection
in metres and also enter the direction of travel using the points
of the compass.
– Confirm your entry by pressing . The screen display will
return to the Navigation main menu.
Entering your position on the map
– Press and then to see your set position
on the map. The scale of the map can be altered using the two
top left-hand function keys.
– Press the button ⇒ page 2, fig. 1 twice to return to
the Navigation main menu.
Starting the demonstration
– Press and then select active. The navigation system is
activated.
– The radio navigation system will now travel along the route
virtually from start to finish if the route guidance function is
started. You can listen to announcements and look at displays.
The navigation system will need some time for an exact definition of your
position if you have transported your vehicle using the train or a ferry. Your
position can be entered manually if the automatic definition is not
successful.
The manual position input can be used to calculate a route between any
two points regardless of where the vehicle is actually located.
Set-up
Position location
OK
OK
Set-up Position map
ESC
To Next Page
Loading...
Need help?
General
