Information and system settings42
– Displays a list of receivable TMC stations. Select a station
whose traffic reports should be played if you happen to be listening to
another radio station. A different station will be chosen automatically if the
selected station can no longer be received.
– Displays a list of the latest traffic reports ⇒ page 35.
⇒ page 42
– Displays the software version installed in the radio naviga-
tion system.
– Displays a list of the streets on the route to the destination.
Use the menu knob to page through the street lists that are on your navi-
gation route. Press if an entry is not fully displayed.
⇒ page 37
• TIM time 1 and TIM time 2: Two different departure times can be
entered here, e.g. 7.00 a.m. and 5.30 p.m. The unit will start recording
traffic reports 1.5 hours before your departure. This means that you will
have up to date traffic information right from the start of your journey.
• TIM standby – Traffic reports will be recorded for two hours after you
have switched off the unit.
Note
The list of announcements cannot be opened whilst a traffic announce-
ment is being made, as it is also being recorded.
System settings
In the system settings menu, you can select different
languages for the displays and spoken announcements,
and adjust the screen brightness.
– In the Info main menu, press ⇒ page 41, fig. 49
to see which settings can be made. You can also call up the
system settings from the Radio main menu by pressing
⇒ page 6, fig. 4 or from the CD main menu
⇒ page 10, fig. 9.
Function keys in the Settings menu
– Shows a list of available languages for display texts and
spoken announcements. Select a language by turning and pressing the
menu knob. You will see a display text in the chosen language. Do not
press any further keys until the loading sequence is finished.
TMC stations
Travel inform.
Syst. settings
System Info
Route list
Position display
Set-up
Fig. 51 System
settings
Syst. settings
Set-up
Language
To Next Page
Loading...
Need help?
General
