Skoda YETI 2010 User Manual

3.4 Removing and installing gasket rings for
camshafts
⇒ “3.4.1 Removing and installing the inlet camshaft on the belt
pulley side”, page 117
⇒ “3.4.2 Removing and installing the exhaust camshaft on the belt
pulley side”, page 118
⇒ “3.4.3 Removing and installing the exhaust camshaft on the
gearbox side”, page 120
3.4.1 Removing and installing the inlet cam‐
shaft on the belt pulley side
Special tools and workshop equipment required
♦ Assembly tool - T10478-
♦ Extractor tool - T20143/1-
Removing
– Remove the toothed belt from the camshaft sprockets
⇒ page 91 .
– Unscrew bolt -1- and remove camshaft adjuster.
– Remove seal -1- using extractor hook -T20143/1- .
Install
Note
Do not oil new sealing ring.
Octavia III 2013 ➤ , Octavia III 2014 ➤ , Yeti 2010 ➤ , Yeti 2011 ➤
1.6/81 kW MPI engine - Edition 06.2014
3. Valve gear 117
ProCarManuals.com

Skoda YETI 2010 Specifications

General

Brand	Skoda
Model	YETI 2010
Category	Automobile
Language	English