Sky SKYLAM 1120 User Manual

SKYLAM 1120 / 720 / 380
WARNING : The laminator should be installed by a trained service technician.
filed with the delivering carrier immediately upon receipt.
The laminator should be located in an area with adequate work space for feeding graphics and lamination
materials. Avoid placing the laminator in a dusty area or near sources of extreme heat of cold.
Once the laminator is in right place, lock the casters into position. Always unlock the casters when moving
to a different location.
Yes
LCD
SKY
The laminator comes fully assembled, except for the guide table to avoid shipping damage.
Upon arrival, thoroughly inspect the unit. It is imperative that any shipping damaged is reported and claim is
4
1,550 watts
3. INSTALLATION
4. SPECIFICATION
1", 58, 3" ( All in One )
Film Core Size
Heating Roller
700mm (27.6")
4m / mins
13 mm
Heating Roller
SKYLAM 380
SKYLAM 720
SKYLAM 1120
350mm (13.8")
4m / mins
13 mm
1100mm (43.3")
4m / mins
13 mm
Yes
Yes
LCD
8 - 10 mins
AC100 - 240V (50/60hz)
1,550 watts
4
Yes
Yes
LCD
8 - 10 mins
AC100 - 240V (50/60hz)
Heating Roller
4
Yes
700 x 460 x 272mm
50kgs
0-150℃
1040 x 460 x 272mm
70kgs
0-150℃
1440 x 460 x 272mm
120kgs
0-150℃
8 - 10 mins
AC220 - 240V (50/60hz)
1,900 watts
MODEL
Max. Laminating width
Max. Laminating speed
Thickness of Mount
Heating system
Power consumption
Dimension ( Stand is not included )
Weight
Operation temperature
Q'ty of roller
Temperature control
Speed control
Display
Preheating time
Power supply
4

Sky SKYLAM 1120 Specifications

General

Brand	Sky
Model	SKYLAM 1120
Category	Laminator
Language	English