SkyAzúl,EquipmentSolutionswww.skyazul.com301‐371‐6126
Informationdisplayshowsletterf:
TEXT: "f = 1"
Main Boom angle below permitted
minimum. LMI 'Cut-off'
TEXT: "e= 3”
Slewing Angle – Superstructure outside
defined Arc permitted by Operation Code
entered into CPU
Raise or lower Main Boom Angle
OR Luffing Jib Angle
Return to the defined arc as laid
down in the load char
NO
YES
YES
NO
Raise Main Boom to within
permitted angle range
YES
Contact SkyAzul 301-748-6057
NO
TEXT: "e= 2”
Angle of Luffing Jib outside permitted
range
To Next Page