Skyjack SJ40T User Manual

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
FAMILIARIZATION
• Test Engine Start/On/Off Switch
1. Ensure engine is running.
2. Select “ ” off position from engine start/
on/off switch.
Result: Engine should shut down and
platform control console is disabled.
3. Select “ ” on position from engine start/
on/off switch.
Result: Platform control console is
enabled.
4. Start engine by selecting “ ” start
position from engine start/on/off switch.
• Test Emergency Stop
1. Ensure engine is running.
2. Push in “ ” emergency stop button.
Result: Engine should shut down and
aerial platform functions should not
operate.
• Test Steering
1. Pull out “ ” emergency stop button.
2. Start engine by selecting “ ” start
position from engine start/on/off switch.
3. Depress and hold footswitch.
4. Press rocker switch on top of drive/steer
controller to “ ” left and “ ” right.
Result: Steer wheels should turn left and
right.
• Test Driving Function
1. Ensure path of intended motion is clear.
2. Ensure boom is in stowed position and y
boom fully retracted.
3. Depress and hold footswitch.
4. Slowly move drive/steer controller in
“ ” forward or “ ” reverse direction
until aerial platform begins to move, and
then return handle to center position.
Result: Aerial platform should move in
forward or reverse direction, and then
come to a stop.
Drive/Steer
Controller
Horn
Emergency Power
Switch
Emergency Stop
Engine Start/On/
Off Switch
Platform Leveling
Override Switch
SJ 40T & SJ 45T
SJ 61T & SJ 66T
Page 35
Section 2 - Familiarization Function Tests

Skyjack SJ40T Specifications

General

Brand	Skyjack
Model	SJ40T
Category	Boom Lifts
Language	English