Skyjack SJ40T User Manual

Start Operation Section 3 - Operation
3.8-22 Hydraulic Generator (If Equipped)
To start the hydraulic generator:
1. Ensure that engine is running.
2. On platform control console, turn generator on/
off switch to “ ” on position.
To restore normal operation:
1. On platform control console, turn generator on/
off switch to “ ” off position.
NOTE
An engine shut down will turn the generator
off. Normal boom functions are disabled
while the generator is on.
3.8-23 Glazier Tray (If Equipped)
1. Ensure that boom is retracted and platform fully
lowered.
2. Place panel on tray and center it to make sure
weight is evenly balanced on the platform.
3. Secure panel in place using the strap provided.
Page 56
SJ 40T & SJ 45T
SJ 61T & SJ 66T

Skyjack SJ40T Specifications

General

Brand	Skyjack
Model	SJ40T
Category	Boom Lifts
Language	English