EasyManua.ls Logo

Skyjack SJ45 T+ - Oscillating Cylinder Test

Skyjack SJ45 T+
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SJ40 T+, SJ45 T+ 238261AAA
61
Function tests Section 4 – Inspections Before Operation
4.3-23 Do a test of the oscillating cylinders
WARNING
Fall hazard. Do not operate the controls on the
platform control console without the correct fall-
protection attached to the designated location in
the platform. If you do not obey, there is a risk of
death or serious injury.
1. Make sure the MEWP is on a firm, level surface.
2. Extend the boom 30 cm (12 in).
Result: The steer axle oscillation locks
16
.
3. Drive one of the steer tires onto a 15 cm (6 in)
block or curb.
Result: The MEWP chassis tilts.
4. Retract the boom.
Result: The steer axle oscillation unlocks
17
.
The MEWP chassis is now level.
16 17
To order go to Discount-Equipment.com

Table of Contents

Related product manuals