Skyjack SJ68RT Series Operating Manual

Page 68 December 2007
Rough Terrain Scissors
TM
Tables Section 4
Table 4.7 Operator’s Checklist
P
F
R
NA
N/A P F R N/A P F R
Scissor Assembly
Scissor Bumpers
Base Weldment
Wheel/Tire Assembly
Steer Cylinder Assembly
Splitter Manifold
Tie Rod
Emergency Lowering Access Rod
Ladder
Hydraulic Outriggers (If Equipped)
Function Tests
Test Platform/Engine/Base Key Switch
Test Emergency Stop
Hydraulic/Fuel Compartment Test Platform Raise/Lower Switch
Test Emergency Lowering
Test Free-wheeling
Test Emergency Stop
Test Enable Trigger Switch
Test Platform Raising/Lowering
Test Lowering Warning
Platform Assembly Test Steering
Test Driving
Test Elevated Drive Speed
Test Brakes
Test Horn
1006AC
OPERATOR'S CHECKLIST
Serial Number:
Model:
Hourmeter Reading: Operator's Name (Printed):
Date:
Time: Operator's Signature:
Each item shall be inspected using the appropriate section of the Skyjack operating manual.
As each item is inspected, check the appropriate box.
- PASS
DAILY
Visual and Daily Maintenance Inspections
Labels
- FAIL
FREQUENTLY
- REPAIRED
ANNUALLY
- NOT APPLICABLE
BI-ANNUALLY
Engine Compartment
Main Power Disconnect Switch
Base Control Switches
Electrical Rollers
Limit Switches Lift Cylinder(s)
Hydraulic Base
Radiator
Muffler and Exhaust
Load/Tilt Sensor
Battery
Hydraulic Pump
Engine Air Filter
Fuel Leaks
Hydraulic Tank
Engine Pivot Tray
Engine Oil Level Test Main Power Disconnect Switch
Fuel Shut-off Valve Base Control Console
Fuel Leaks
Main Manifold
Gear Type Flow Divider
Hydraulic Oil
Hydraulic Return Filter Platform Control Console
Fuel Tank
Platform Control Console
Test Hydraulic Outriggers (If Equipped)Lifting Mechanism
Maintenance Support
Anchorages
AC Outlet on Platform
Manuals
Note:
Make a copy of this page or visit the Skyjack web site:
www.skyjack.com for a printable copy.









Skyjack SJ68RT Series Specifications

General

Brand	Skyjack
Model	SJ68RT Series
Category	Scissor Lifts
Language	English