EasyManuals Logo

Skyjack SJ68RT Series Operating Manual

Skyjack SJ68RT Series
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
Rough Terrain Scissors
December 2007 Page 67
Section 4 Tables
General Maintenance
Before attempting any repair work, disconnect battery by turning main power disconnect switch to “ ” off
position. Preventive maintenance is the easiest and least expensive type of maintenance.
Table 4.6 Maintenance and Inspection Schedule
Frequency
Daily
3 months or
150 hours
Yearly
Frequency
Daily
3 months or
150 hours
Yearly
Scissor Assembly A
Labels A Scissor Bumpers A
Electrical A Rollers A
Limit Switches A Lift Cylinder(s) A
Hydraulic A Base
Engine Compartment Base Weldment A
Main Power Disconnect Switch A Wheel/Tire Assembly A
Base Control Switches A Steer Cylinder Assembly A
Load/Tilt Sensor A Splitter Manifold A
Battery A Tie Rod A
Hydraulic Pump A Emergency Lowering Access Rod A
Radiator A Ladder A
Muffler and Exhaust A Hydraulic Outriggers (If Equipped) A
Engine Pivot Tray A Function Tests
Engine Oil Level A Test Main Power Disconnect Switch A
Fuel Shut-off Valve A Base Control Console
Engine Air Filter A Test Platform/Engine/Base Key Switch A
Fuel Leaks A
Test Emergency Stop
A
Hydraulic/Fuel Compartment Test Platform Raise/Lower Switch A
Hydraulic Tank A Test Emergency Lowering A
Hydraulic Oil A Test Free-wheeling A
Hydraulic Return Filter A Platform Control Console
Fuel Tank A Test Emergency Stop A
Fuel Leaks A Test Enable Trigger Switch A
Main Manifold A Test Platform Raising/Lowering A
Gear Type Flow Divider A Test Lowering Warning A
Platform Assembly Test Steering A
Anchorages A Test Driving A
AC Outlet on Platform A Test Elevated Drive Speed A
Manuals A Test Brakes A
Platform Control Console A Test Horn A
Lifting Mechanism Test Hydraulic Outriggers (If Equipped) A
Maintenance Support A
1005AB
A - Perform Visual and Daily Maintenance Inspections & Functions Test. Refer to Section 2.3 and Section 2.4 of this manual.
B - Perform Scheduled Maintenance Inspection. Refer to Service & Maintenance manual.
* - Maintenance must be performed only by trained and competent personnel who are familiar with mechanical procedures.
- Refer to Skyjack's website @ www.skyjack.com for latest service bulletins proior to performing quarterly or yearly inspection.
B*
B*
B*
Visual and Daily Maintenance Inspections
WARNING
Use original or manufacturer-approved parts and components for MEWP.
NOTE
The owner’s annual inspection decal must be completed after an annual inspection has been
completed.

Other manuals for Skyjack SJ68RT Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Skyjack SJ68RT Series and is the answer not in the manual?

Skyjack SJ68RT Series Specifications

General IconGeneral
BrandSkyjack
ModelSJ68RT Series
CategoryScissor Lifts
LanguageEnglish

Related product manuals