Page 80 December 2007
Rough Terrain Scissors
TM
Labels Section 5
11
10
No. Label Pictorial Description
10
Model Number*
Product Identifier
*Model number will vary, may not be as shown.
11
Winching/Towing/Pushing Procedure
Refer to Operating manual.
1. Block or chalk wheels to prevent MEWP from rolling.
2. Turn main power disconnect switch to off position.
3. Locate brake valve and pump.
4. Push in black knob.
5. Pump by pushing red knob in and out until firm resistance is
felt. Brake is now released.
6. Push/tow/winch to desired location.
7. Block or chalk wheels to prevent MEWP from rolling.
8. Reset brake by pulling out black knob.
Left Side
Labels and Nameplates - Models 6826 & 6832
To Next Page
Loading...
Need help?
General
