To Next PageTo Next Page
Need help?Do you have a question about the Skytrac DVI-300 and is the answer not in the manual?
General| Brand | Skytrac |
|---|---|
| Model | DVI-300 |
| Category | Recording Equipment |
| Language | English |
Provides technical information for installing the DVI-300 system and its functions.
Outlines the manual's sections, including product overview and system components.
Details the components of the ISAT-200 System, including the DVI-300 and ISAT-200.
Overview of the physical and electrical requirements for the DVI-300 system.
Specifies the input voltage, nominal voltage, and average power consumption of the DVI-300.
Details the DVI-300's digital output capabilities and serial port specifications (RS-232, RS-485).
Lists physical dimensions, weight, operating temperature, and mounting method for the DVI-300.
States DVI-300 models are qualified to DO-160E environmental category standards.
Contains procedures for the mechanical installation of the DVI-300, including unpacking.
Outlines installation regulations and requirements for the DVI-300, including installer qualifications.
Lists the primary tasks involved in installing the DVI-300 system, from unpacking to testing.
Provides the weight specifications for the DVI-300 component.
Instructions for checking and inspecting system components upon receipt for damage or missing items.
Specifies the required installation kits and wiring harness considerations for the DVI-300.
Provides information for completing electrical connections for DVI-300 installation, including diagrams.
Describes the pin-out layout of the DVI-300 DB-25 and DB-9 connectors.
Refers to approved drawings for ISAT-200 installation, which includes the DVI-300.
Explains how the DVI-300 switches between day/night modes based on aircraft dimmer bus voltage.
Contains instructions for tests to be performed after installation to confirm correct system operation.
Details the steps required to set up for the DVI-300 post installation function test.
Procedures for testing DVI-300 operation, including calls, data transmission, and emergency switch functions.
Verifies that the DVI-300 does not interfere with basic aircraft systems and avionics.
States that no specific installation limitations have been identified for the DVI-300.
States that no specific operation limitations have been identified for the DVI-300.
Advises periodic inspection of DVI-300 LEDs for proper functioning and replacement if needed.
States the DVI-300 requires no maintenance except for the inspection of lighting components.
Provides a brief description of the DVI-300's human machine interface components.
Describes the DVI-300's thirteen-button keypad used for dialing and message composition.
Explains that the panel annunciators indicate various operational conditions.
Details the RS232 port used for updating the DVI-300 firmware from a computer.
