DVI-300 Installation Manual
Document Rev. 01.004 DOC0456 Page 18 of 31
Restricted Proprietary and Confidential Information
3.6 INSTALLATION MATERIALS
3.6.1 INSTALLATION KIT FOR THE DVI-300, INSTALLATION KIT FOR THE ISAT-200
The DVI-300 is installed using the DVI-300 Installation Kit (P/N: 107-300-01). The installation kit contains all the
components necessary to install the DVI-300. (Components from the ISAT-200 Installation Kit will also be
required.)
3.6.2 WIRING HARNESS
Determine the location of the DVI-300 in order to determine wiring harness lengths. Create the wiring harness for
your model of DVI-300 referencing applicable approved installation drawings for your airframe. Ensure the wiring
harness complies with the requirements of FAA advisory circular AC43.13-1B.
UNCONTROLLED COPY IF PRINTED
To Next Page
Loading...