Only after the battery has been initially charged for up to 5 hours as indicated on Page 12 is the
Slinger Bag ready to be used on court.
Please follow these quick start operating guidelines
1. Position Slinger Bag on the court in your desired launching position. See our suggested positions
based on level of play on pages 22 & 23..
2. Make sure that the Slinger® logo on the top of the Oscillator is facing forwards to the net and the
wheel location slots are positioned at the rear.
3. Position Slinger Bag onto the top of the Oscillator making sure that the wheels are correctly
located into the wheel slots provided on the Oscillator base.
4. Open the lower front panel to display the ball launcher.
5. Open the top ball feeder panel. Make sure that nothing is obstructing the ball feeder. If all is clear
load up to a maximum of our recommended 120 pickleballs.
6. On the front control panel adjust the control knobs to set the desired BALL SPEED, BALL FEED and
BALL SPIN. See our suggested positions based on level of play on pages 22 & 23..
QUICK START LAUNCHER WITH THE OSCILLATOR
USER NOTE
Hook the open door panel on to the side of the Trolley Bag using the clip provided
on the left rear side as you look at the launcher.
USER NOTE
Ensure that the Oscillator is positioned in its central (mid) location. This is the ideal
starting position to obtain optimum Oscillation performance.
USER NOTE
Slinger advises that the optimum ball launcher operation is achieved with 72
pickleballs.
5
Slinger Bag User Guide - Pickleball 2/2023
To Next Page
Loading...
