Sloan SF Series - User Manual

To Next Page

Code No. 0816496

Rev. 4 (04/14)

INSTALLATION INSTRUCTIONS FOR SLOAN SF SERIES

ELECTRONIC SENSOR ACTIVATED LAVATORY FAUCETS

LIMITED WARRANTY

Sloan Valve Company warrants its SF Series Electronic Hand Washing Faucets to be made of first class materials, free from defects of material or workmanship under normal use and

to perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of one year from date of purchase.

During this period, Sloan Valve Company will, at its option, repair or replace any part or parts which prove to be thus defective if returned to Sloan Valve Company, at customer’s cost,

and this shall be the sole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or

organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of the batteries.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY

RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.

SF-2100 Series

Adapter Powered with Battery Backup,

Sensor Activated, Pedestal Style Lavatory Faucets

SF-2150 Series

Battery Powered, Sensor Activated,

Pedestal Style Lavatory Faucets

SF-2200 Series

Adapter Powered with Battery Backup

Sensor Activated, Gooseneck Style

Lavatory Faucets

SF-2250 Series

Battery Powered, Sensor Activated

Gooseneck Style Lavatory Faucets

SF-2300 Series

Adapter Powered with Battery Backup

Sensor Activated, 4” Centerset Lavatory Faucets

SF-2350 Series

Battery Powered, Sensor Activated

4” Centerset Lavatory Faucets

SF-2400 Series

Adapter Powered with Battery Backup,

Sensor Activated, Pedestal Style Lavatory

Faucets

SF-2450 Series

Battery Powered, Sensor Activated,

Pedestal Style Lavatory Faucets

Prior to installing the Sloan SF Series Electronic Lavatory Faucet, install

the items listed below. Also, refer to the appropriate rough-in diagram.

•

Plug-In Adapter

Models SF-2100/SF-2200/SF-2300/SF-2400 only

— Install

electrical receptacle(s) for plug-in adapter(s) — 120 VAC, 1 amp

service for each 6 VDC plug-in adapter used.

International models may be supplied with a 220 VAC/VDC

transformer.

• Hot and cold water supply lines or tempered water supply line

• Drain lines

Important:

•

INSTALL ALL ELECTRICAL WIRING IN ACCORDANCE WITH

NATIONAL/LOCAL CODES AND REGULATIONS.

•

INSTALL ALL PLUMBING IN ACCORDANCE WITH APPLICABLE CODES

AND REGULATIONS.

•

A 6 VDC STEP-DOWN ADAPTER MUST BE USED FOR HARDWIRE

APPLICATIONS.

•

BEFORE CONNECTING COPPER TUBE(S) OR FLEX HOSE(S) TO

SUPPLY STOP(S), FLUSH ALL WATER LINES UNTIL WATER IS CLEAR.

PRIOR TO INSTALLATION

TOOLS REQUIRED FOR INSTALLATION

• Electric drill for drilling anchor holes (1/4” or 6 mm drill bit)

• Straight blade and phillips blade screwdrivers

• Open end wrenches (9, 11, 13, 16, 22 mm)

The components supplied with International Models of the SF Series Faucets may vary from what is shown in this manual. Consult factory to identify

variations that may apply to your market.

Main Page

Need help?

Do you have a question about the Sloan SF Series and is the answer not in the manual?

Sloan SF Series Specifications

General

Flush Volume	1.6 gpf (gallons per flush)
Installation Type	Wall-mounted
Material	Brass
Compliance	ASME A112.19.2
Product Type	Flushometer
Temperature Control	Not applicable
Finish	Chrome
Flow Rate	1.6 gpf
Temperature Range	Not applicable
Inlet Size	1" I.P.S.
Activation	Sensor Activated (Automatic)