SMA STP 50-40 - Page 60

7 Commissioning
SMA Solar Technology AG
Operating manualSTP50-4x-BE-en-2360
Procedure:
1. Select the configuration option Manual Configuration.
☑ The Device Parameters menu on the user interface will open and all available
parameter groups of the inverter will be displayed.
2. Select [Edit parameters].
3. Select the desired parameter group.
☑ All available parameters of the parameter group will be displayed.
4. Set the desired parameters.
5. Select [Save all].
☑ The inverter parameters are set.
Also see:
• ⇒page000