SMA STP 50-40 - 8.7 Starting the Installation Assistant

8 Operation
SMA Solar Technology AG
Operating manualSTP50-4x-BE-en-2372
8.6 Activating the Smart Inverter Screen
With the Smart Inverter Screen, the most important inverter data is displayed directly on the user
interface login page. To activate the Smart Inverter Screen, proceed as listed in the following.
Procedure:
1. Activate the user interface (see Section8.2, page61).
2. Log in as Installer or User.
3. Select the menu User Settings (see Section8.4, page68) on the start page of the user
interface.
4. Select [Smart Inverter Screen].
☑ The Smart Inverter Screen has been activated.
8.7 Starting the Installation Assistant
The installation assistant leads you step-by-step through the steps necessary for the initial
configuration of the inverter.
Layout of the installation assistant
A
C
B
Figure 18: Layout of the installation assistant (example)
Position Designation Description
A Configuration steps Overview of the installation assistant steps. The number of
steps depends on the type of device and the additionally
installed modules. The current step is highlighted in blue.
B User information Information about the current configuration step and the
setting options of the configuration step.
C Configuration field You can make settings in this field.