SMA STP 50-40 - Displaying and Downloading the Stored Data

8 Operation
SMA Solar Technology AG
Operating manual STP50-4x-BE-en-23 71
Position Designation Description
E Current power and cur-
rent consumption
Temporal progression of the PV power and the power
consumption of the household over the selected time pe-
riod. Please note, the power consumption will only be dis-
played if an energy meter is installed in the PV system.
F Status display The various areas display information on the current status
of the PV system.
• Device status
Displays whether the inverter is currently in a fault-
free operating state or whether there is an Error or
Warning present.
• Current power
Displays the power currently being generated by the
inverter.
• Yield
Displays the energy yield of the inverter.
• Grid supply
Displays the energy supply from the utility grid.
• Power at the grid-connection point
Indicates which power is currently fed in or obtained
at the grid-connection point.
• Irradiation / wind speed
Depending on the connected sensors, displays the
current solar irradiation and/or wind speed.
• Temperature measurement
Depending on the connected sensors, displays the
current temperature of the PV modules and/or the
ambient temperature.
8.5 Displaying and Downloading the Stored Data
If an external storage device is plugged in, you can display and download the stored data.
Procedure:
1. Open the user interface (see Section8.2, page61).
2. Log into the user interface (see Section8.3, page65).
3. Select the menu Data.
4. Select the folder Data.
5. To call up the data, select the respective folder and click on the required file.
6. To download the data, select the data type to be exported in the drop-down list. Then apply
the time filter and select Data export.