SMA STP 60-10 - Page 42

5 Technical Data SMA Solar Technology AG
42 SHP75-10-STP60-10-IA-xx-18 Installation Guide
Table 5.1 Specifications
1)
at nominal grid voltage
2)
at nominal grid voltage, Cos(phi) = 1.
Table 5.2 Safety specifications
1)
depending on local regulations
Integrable DC surge arrester /
AC surge arrester
Type II / type II + III (combined) Type II / type II + III (combined)
Efficiency
Max. efficiency 98.8% 98.8%
EU efficiency 98.2% 98.3%
MPPT efficiency, static 99.9% 99.9%
Enclosure
Dimensions (W / H / D) 740 × 570 × 306 mm 740 × 570 × 306 mm
Weight 77 kg 75 kg
Acoustic noise level 58 dB(A) (typical) 58 dB(A) (typical)
Parameter SHP 75-10 STP 60-10
Parameter SHP 75-10 STP 60-10
Protection class (according to
IEC 62109-1)
II
Electrical
Electrical safety • IEC 62109-1/IEC 62109-2
(Class I, grounded –
Communication part Class II, PELV)
• IEC 62109-1/IEC 62109-2
(Class I, grounded –
Communication part Class II, PELV)
Functional
Functional Safety • Voltage and frequency monitoring
• Monitoring of DC current share in
AC current
• Insulation resistance monitoring
• FI monitoring
• Voltage and frequency monitoring
• Monitoring of DC current share in
AC current
• Insulation resistance monitoring
• FI monitoring
Islanding detection - grid failure • Active Frequency Shift
• Disconnection
• Three-phase monitoring
• ROCOF/SFS
• Active Frequency Shift
• Disconnection
• Three-phase monitoring
• ROCOF/SFS
RCD compatibility
1)
Type B, 1000 mA Type B, 600 mA