What does 'High discharge curr. > Check generator' mean on SMA SUNNY BOY 3.0?
This message indicates that the leakage current of the inverter and the battery is too high. Check the PV system for ground faults.
What does 'Reconnection fault grid' mean on SMA Inverter?
This message indicates that the changed country data set or the value of a parameter you have set does not correspond to the local requirements. Ensure that the country data set has been configured correctly.
What does 'Installation fault > Check connection' mean on SMA SUNNY BOY 3.0 Inverter?
This message indicates that a second line conductor is connected to N. Connect the neutral conductor to N.
What does 'PE conn. missing > Check connection' mean on SMA SUNNY BOY 3.0 Inverter?
This message indicates that the grounding conductor is not correctly connected. Ensure that the grounding conductor is correctly connected.
Why does my SMA SUNNY BOY 3.0 Inverter show 'DC overvoltage > Disconnect generator'?
This message indicates an overvoltage at the DC input. Immediately disconnect the inverter from all voltage sources. Check whether the DC voltage is below the maximum input voltage of the inverter. If the DC voltage exceeds the maximum input voltage of the inverter, ensure that the PV array has been correctly rated or contact the installer of the PV array. If this message is repeated frequently, contact the Service.
What does 'Insulation failure > Check generator' mean on SMA SUNNY BOY 3.0?
This message indicates that the inverter has detected a ground fault in the PV array. Check the PV system for ground faults.
How to fix WLAN connection issues on SMA Inverter?
If you're experiencing issues with the WLAN connection on your SMA Inverter: * Make sure that the SSID, WLAN password, and encryption method have been entered correctly. * Verify that the WLAN router or WLAN Access Point is within range and functioning correctly. * If the issue persists, consider improving the WLAN connection by using a WLAN repeater.
Document validity for specific firmware versions.
Specifies intended users and required skills for qualified persons.
Explains different warning message levels like DANGER, WARNING, CAUTION, NOTICE.
Explains common symbols used throughout the manual.
Defines the proper and intended use of the Sunny Boy inverter.
Contains critical safety instructions that must be saved and followed.
Provides a detailed description of the inverter's design and components.
Explains various symbols found on the inverter and their meanings.
Lists and describes the product's interfaces and functions.
Explains the meaning of different LED signals and their states.
Details requirements for the mounting location and environmental conditions.
Step-by-step guide for physically mounting the inverter.
Identifies and labels all connection points on the inverter.
Covers requirements and procedures for AC connection.
Procedure for connecting network cables for communication.
Covers requirements and assembly for DC connection.
Step-by-step guide for commissioning the inverter and system.
Specific steps for commissioning the inverter itself.
Guide for choosing configuration methods like installation assistant.
Details methods for connecting to the inverter's user interface.
Procedures for logging into and out of the inverter's user interface.
Guide to the step-by-step assistant for initial inverter configuration.
Guide to changing inverter operating parameters for optimization.
Procedure to unlock the inverter using a Personal Unlocking Key (PUK).
Lists event numbers, causes, and corrective measures for troubleshooting.
Procedures for identifying and rectifying ground faults in the PV system.
Technical specifications for DC input and AC output.
Provides general specifications like dimensions, weight, and environmental data.
Lists the built-in protective devices and their functions.
To Next Page
General