4 Operating the Display SMA America, LLC
20 SB6-11TLUS-BA-eng-BUS121211 User Manual
4 Operating the Display
The display shows the current operating data of the inverter (e.g. status, power, input voltage) and
errors or disturbances.
The displayed operating data is updated every five seconds. The backlight shuts off automatically
after two minutes.
You can operate the display by tapping on the enclosure lid:
• To activate the backlight, tap once.
• To scroll to the next text line of a displayed message, tap once.
• To display the serial number and designation of the inverter, the firmware version, and the status
of the Power Balancer (if active) in succession during operation, tap twice in succession.
To Next Page
Loading...
