SMA Solar Technology AG
52 SB50US-80US-IUS094030 Installation Guide
13. Pull the cable into the Sunny Boy.
14. Pull the cable slightly back in order to seal the
grommet.
15. Connect the green/yellow cable of the Sunny Boy to
the terminal labeled:
16. Connect the white wire of the SMA DC-Disconnect to
the terminal labeled N and the black wire to the
terminal labeled L1 of the Sunny Boy.
17. For 208/240 V connect the red wire to the terminal
labeled L2 in the Sunny Boy.
The Sunny Boy 8000US may not be connected to a
208 V grid.
To Next Page
Loading...
