SMA Technologie AG Installation
Installation Guide SB25_30-11:SE0307 Page 21
6 Installation
6.1 Mounting the Device
To make the job easier, we recommend you use the
supplied wall bracket to mount the Sunny Boy. For
vertical installation and installation on solid concrete
or block walls, for example, you can fit the bracket
using 6 mm x 50 mm hexagon bolts to DIN 571
standard, stainless steel type, and with wall anchors
type SX 8.
When selecting the mounting materials, be sure to
take into account the weight of the Sunny Boy (SB
2500 (30 kg), SB 3000 (32 kg)).
If you do not want to use the supplied wall bracket as a template, observe the
dimensions shown in the illustration below. The procedure for mounting the inverter
using the wall bracket is described on the following pages.
179.5 mm
112 mm
217.5 mm
108.75 mm
117 mm
182 mm
To Next Page
Loading...
