3 Product Overview
SMA Solar Technology AG
User Manual 27SCCPXT-E7-BA-en-58
3.3.4.3 Status Symbols
Depending on the status of the device communication, the device symbols are displayed in the tree or device view with
various status symbols.
Symbol Explanation
The inverter is ready for operation.
There is an error in the inverter.
An error has occurred in the communication with the inverter.
3.4 Symbols on the Product
The following gives an explanation of all the symbols found on the inverter and on the type label.
Symbol Designation Explanation
CE marking The product complies with the requirements of the applicable EU di-
rectives.
Protection classI All electrical equipment is connected to the grounding conductor sys-
tem of the product.
Degree of protectionIP54 The product is protected against interior dust deposits and splashing
water from all angles.
Beware of a danger zone This warning symbol indicates a danger zone. Be particularly vigilant
and cautious when working on the product.
Beware of dangerous volt-
age
The product operates at high voltages. All work on the product must
be carried out by qualified persons only.
Beware of hot surface The product can get hot during operation. Avoid contact during oper-
ation. Allow the product to cool down sufficiently before carrying out
any work. Wear personal protective equipment such as safety
gloves.
Use hearing protection. The product generates loud noises. When working on the product,
wear hearing protection.
Observe the documenta-
tion.
Observe all documentation supplied with the product.
To Next Page
Loading...
